Jiaozuo Debon Technology Co., Ltd.
Jiaozuo Debon Technology Co., Ltd.
Add to Cart
Conveyor Components Impact Bed Conveyor Buffer Bed
Impact bed:
Used in the conveyor loading points or transfer points to replace traditional conveyor idlers.
It's designed to absorb impact loading and help eliminate spillage and scattering of the products. This results in less wear and tear on your conveyor system, dramatically improves the efficiency and reduces the maintenance cost.
Specification of impact bed:
| Type | Belt Speed(m/s) | Drop Height(m) | Particle(mm) | Capacity(t/h) | ||||
| V<4.5 | v≥4.5 | h<3 | h≥3 | k<150 | k≥150 | I<6000 | I≥6000 | |
| DB-HCC (Light-Duty) | √ | √ | √ | √ | ||||
| DB-ZHCC (Medium-Duty) | √ | √ | √ | √ | ||||
| DB-JHCC (Heavy-Duty Modular) | √ | √ | √ | √ | ||||
The supporting frame has three types, light-duty support frame, medium support frame and heavy duty support frame, it is decided by the loading capacity and drop height.
DB-HCC Light duty impact bed:
| Model | Belt Width | H | A | B | M | θ | D | Impact Bar | Idler Length (mm) | ||
| Left | Center | Right | |||||||||
| DB-HCC50×L | 500 | 180 | 740 | 800 | 130 | 30 | 14 | 1 | 2 | 1 | 200 |
| DB-HCC65×L | 650 | 180 | 890 | 950 | 130 | 30 | 14 | 2 | 2 | 2 | 250 |
| DB-HCC80×L | 800 | 200 | 1090 | 1150 | 130 | 35 | 14 | 2 | 3 | 2 | 315 |
| DB-HCC100×L | 1000 | 213 | 1290 | 1350 | 170 | 35 | 18 | 3 | 3 | 3 | 380 |
| DB-HCC120×L | 1200 | 257 | 1540 | 1600 | 200 | 35 | 18 | 3 | 4 | 3 | 465 |
| DB-HCC140×L | 1400 | 265 | 1740 | 1800 | 220 | 35 | 18 | 4 | 5 | 4 | 530 |
| DB-HCC160×L | 1600 | 290 | 1980 | 2050 | 240 | 35 | 20 | 5 | 5 | 5 | 600 |
| DB-HCC180×L | 1800 | 320 | 2180 | 2250 | 240 | 35 | 20 | 5 | 6 | 5 | 670 |
| DB-HCC200×L | 2000 | 350 | 2420 | 2490 | 260 | 35 | 20 | 6 | 6 | 6 | 750 |
About conveyor impact bar:
1. UHMWPE cap + rubber cusion + steel T-slot or Aluminium T-slot
2. high wear resistant, impact resistant, belt supporting, protect conveyor belt,
3. easy installing and replacement.
Features:
1. Using a special UHMW polyethylene surface, so that the coefficient of friction between the belt and the cushioning strip to minimize, and good wear resistance.
2. Fine rubber buffer layer is sufficiently effective to absorb the impact of the whereabouts of the material, greatly reducing the impact on the conveyor belt when the materials drop, the real point is to improve the blanking force status.
3. Steel skeleton, aluminium slot, easy to replace.
Specification:
| Item | Size (mm) | Length (mm) |
| Impact Bar Standard 1 | 100*55 | 1220/1400/1500/2010,etc |
| Impact Bar Standard 2 | 100*75 | 1220/1400/1500/2010,etc |
| Impact Bar Heavy Duty | 280*100 | 1080 |