Jiaozuo Debon Technology Co., Ltd.
Jiaozuo Debon Technology Co., Ltd.
Add to Cart
Conveyor Rubber Ceramic Pulley Lagging With Cold Vulcanizing Cn Bonding Layer
Description:
Ceramic pulley lagging is installed on the conveyor drive pulley to prevent belt slippage and extend the service life of conveyor belt and pulley. The alumina ceramic tiles help in proper grip of the belt under wet, muddy or any other such arduous conditions.
Ceramic pulley lagging is specially suited for pulleys where slippage and excessive wear and tear problems make normal rubber lagging ineffective.
Ceramic Pulley Lagging With Cn Bonding Layer
Ceramic Pulley Lagging in pieces, custom-made sizes are available
Ceramic Pulley Lagging can also be produced in rolls. 10 meter per roll
Technical Data
| Alumina Ceramic Tile | ||
| Aluminum Oxide | % | 95 |
| Specific Gravity | g/cm3 | 3.7 |
| Vickers Hardness | HV(30) | 1010 |
| Fracture Toughness | MPa•m1/2 | 3.6 |
| Rubber Compound | ||
| Tensile Strength | MPa | 20 |
| Elongation At Break | % | 600 |
| Hardness | Shore A | 63+/-5 |
| Abrasion Loss | mm3 | 110 |
| CN Layer Bonding Strength | kN/m | 13 |
Why Choose Us:
1. We Use High Quality Raw Materials:
2. Strict quality control
3. Extensive experience: